Custom Signage Profiles for Navi Mumbai International Airport

Navi Mumbai International Airport required signage shapes that followed its interior design specifications without compromising practical use. Cosign India supplied 100 mm I-Sign profiles with custom rounded corners at special angles, alongside rounded 90-degree corners, bringing architectural requirements together with changeability, easy maintenance and structural strength for an environment operating around the clock.

Aviation Architectural Signage I-Sign Custom Corners

The Project

The signage shapes for Navi Mumbai International Airport were established through design specifications created to follow the airport’s interiors. The requirement was therefore not simply to select a standard rectangular frame. The supporting profiles and corner components needed to translate the specified outlines into a usable signage system while preserving the intended relationship with the surrounding architecture.

Cosign’s contribution was the supply of 100 mm I-Sign profiles and the required corner configurations. Some signs called for custom angles; others used rounded corners at 90 degrees. Across those variations, the system also needed the changeability, maintainability and structural strength relevant to an airport environment requiring signage to function throughout the day and night.

The Challenge

The challenge centred on reconciling a defined architectural shape with the practical demands of the signage system. A rounded corner is not necessarily a right-angle corner: the curvature of the edge and the angle between adjoining sides are separate details. The project required those details to work together, including where the specified outline departed from a conventional rectangular form.

The signage also had to remain practical after the design had been realised. Custom shapes could not displace the need for changeable information, accessible maintenance and a structurally capable profile system. In a setting requiring signage to function around the clock, the brief placed equal importance on the physical form and its continued usability.

The Solution

Cosign supplied the I-Sign profiles in a 100 mm configuration, with custom rounded corners developed to accommodate the special acute and obtuse angles required by the design specifications. The supply also included rounded 90-degree corner configurations for other signs. This allowed the profile system to address different outlines within the project, rather than requiring the specified signage shapes to be reduced to a single standard geometry. Cosign’s technical team designed these components, developed and tested full-scale prototypes to validate them, and had them manufactured to the required quality standards within the narrow project timeframe.

I-Sign provided the combination of changeability, ease of maintenance and structural strength identified in the brief. The response focused on adapting the profile and corner arrangement while retaining those functional qualities. Cosign’s role was to supply the system components supporting the specified design; the shape requirements originated in the airport’s design documentation and its intended relationship with the interiors.

Rounded Corners, Different Angles

The corner detail is central to this case study because it explains what was customised. Rounding an otherwise standard corner would address only its edge treatment. At Navi Mumbai International Airport, the special-angle signs also required the adjoining sides to meet at the angles defined by the design. Both the outline and the rounded finish therefore had to be considered in the supplied components, not just the appearance of the sign face.

Alongside those bespoke details, rounded 90-degree corners remained part of the requirement. Their inclusion shows that the project involved a range of configurations rather than one unusual sign shape repeated everywhere. The common starting point was the 100 mm I-Sign profile, with corner arrangements responding to each specified form. Customisation was consequently directed at a precise architectural requirement while keeping changeability and maintenance central to the selection.

Outcome

The supplied profile and corner configurations provided a system response to the airport’s specified signage shapes. The special-angle details accommodated the architectural outlines, while the rounded 90-degree configurations covered other requirements within the same project. This preserved the distinction between the different forms without treating customisation and standard profile construction as opposing approaches to the work.

The practical value extends beyond the outline. I-Sign retained the changeability, easy maintenance and structural strength that informed its selection for continuous airport use. The project demonstrates Cosign’s contribution at the component level: supplying a modular profile system adapted to the design specifications, with the functional qualities required to support the signage throughout its use.

Look at More Projects

Look at More Projects

Look at More Projects

Start your signage project.

Start your signage project.

Tell us about your project and our team will respond within one business day with product recommendations, specifications, or pricing.

Belgium & Europe

+32 (0)13 35 10 30

Mon–Fri · 9:00am–5:30pm CET

India

+91 860 033 3999

Mon–Sat · 9:30am–6:00pm IST

Email

info@cosign.in

I am

I am

Name

Name

Company

Company

Email

Email

Phone

Phone

I need

I need

Project Description

Project Description

Manage every sign you install,
from specification to replacement.

Manage every sign you install,
from specification to replacement.

Once your Module Plus Indoor system is installed, SignAgent keeps it current. Track sign
locations, manage content updates, and coordinate installers — all from one platform.

Once your Module Plus Indoor system is installed, SignAgent keeps it current. Track sign locations, manage content updates, and coordinate installers all from one platform.